CRONUS Achos Case Gaming Black Mid Tower 1 x USB 3.0 / 2 x USB

CRONUS ACHOSThe New CRONUS ACHOS is a Mid Tower professional gaming case, supporting a simple and easy to build internal structure, with 4mm tempered glass front and left side panel, allowing you to see the beautiful lighting from the ARGB fans inside.Supporting up to 6 fans for superior air cooling and comes fitted as standard with 4 x 120mm F1 ARGB LED fans, 3 at the front and 1 at the back. All switchable through the I/O Panel or through your motherboards internal software via the 3-pin ARGB connector. (Supported motherboards only). To Sync the RGB lights on the case with the motherboard software. Hold down the button the on the case that you would use to cycle through the colours for a few seconds, it will transfer the control from the case to the board. You can enhance your cooling further with room at the front for a radiator up to 240mm and 120mm at the rear. This gaming case has good compatibility, it supports ATX, Micro ATX, Mini-ITX motherboards and ATX power supplies, with cabling hidden behind the black PSU shroud. On the top of the case for easy access is 1 x USB 3.0, 2 x USB 2.0 and HD audio allowing you to connect to a variety of devices, as well as your ARGB switch for on-the-fly chaning of the LEDs on your fans.Key Features- Stylish Exterior: 4mm thick tempered glass front and left side panel not only gives the ACHOS a professional look but allows you to show off the lighting coming from your fans.- Fans: Supports up to 6 fans with 4 x F1 ARGB fans included to give your case some added colour in your finished build.- Water-Cooling Support: As well as supporting 6 fans the ACHOS supports a radiator up to 240mm at the front and 120mm at the rear to give you extensive cooling support.- IO Panel: Easy accessible 2 x USB 2.0 and 1 x USB 3.0 ports on the top with transfer speeds of 5Gbps means you can connect to a range of media devices.- Removable Dust Filters: A dust filter on the top and bottom helps to prevent dust from getting into your build and improve the performance of your chassis.Form FactorMid TowerMotherboard SupportATXMicro ATXMini-ITXPSU SupportStandard ATXPSU LocationBottomPSU IncludedNoWater Cooling ReadyYesSupported Radiator SizeFront: Up to 240mmRear: Up to 120mmMaterialBody: 0.5mm SPCCFront and Side: 4mm Tempered GlassSide Panel4mm Tempered GlassDrive BaysInternal: 2 x 3.5" / 2 x 2.5"ExpansionSlots: 7CoolingFront: 3 x 120mm / 3 x 140mm Fans (3 x 120mm F1 ARGB Fans included)Top: 2 x 120mm / 2 x 140mm FansRear: 1 x 120mm Fan (1 x 120mm F1 ARGB Fan included)Side: NoneBottom: Filtered Vent For PSUIO Ports1 x USB 3.02 x USB 2.0HD AudioARGB SwitchClearenceInternal Cable Management Depth: 15mmGPU Max Length: 350mmCPU Cooler Maximum Height: 160mmPSU Shroud: IncludedColourBlackProduct Dimensions ( L x W x H )405 x 195 x 450mmWeightNet: 5.9 KGsGross: 6.7 KGsPallet Quantity40 units-Form Factor: Mid TowerMotherboard Support: ATX / Micro ATX / Mini-ITXPSU: NoneCase Colour: BlackLED Colour: Addressable RGBUSB 3.0: 1Side Panel: Tempered Glass